Sivun sisältöön

Noiseless Stage Spotlight

  • With 4-in-1 RGBW LEDs and W-DMX
  • Ideal for use on stages and in other settings where noise needs to be kept to a minimum
  • Built-in receiver module from Wireless Solution (G5) for wireless control
  • Robust housing made from diecast aluminium
  • Split-yoke bracket for standing and hanging installations
  • Includes an IR remote control
  • Suitable W-DMX transmitter available under Article Nr 366876 and Article Nr 464173 (both are not included)
  • Suitable 4-in-1 case available under Article Nr 489959 (not included)

Technical specifications:

  • Light source: 14 x 8W RGBW 4-in-1 LEDs
  • Beam angle: 25°
  • Control: DMX (4/7/9 channels), master/slave, automatic programs
  • Selectable static colours
  • DMX input and output: XLR 3-pin
  • Power input and output: Power Twist TR1
  • Power supply: AC 100 - 240 V at 50/60 Hz
  • Power consumption: 112 W
  • IP rating: IP65
  • Dimensions with bracket (W x H x D): 293 x 298 x 155 mm
  • Weight: 4.8 kg
  • Myynnissä vuodesta Toukokuu 2019
  • Tuotenumero 452127
  • Myyntierä 1 kappaletta
  • Construction Type Outdoor
  • Number of LEDs 14
  • power of the single LED 8 W
  • Colour Mixing RGBW
  • LED Type x-in-1
  • Floor housing Yes
  • Fanless Yes
  • remote control Included
  • wireless DMX Yes
  • Housing Colour Black
239 €
Kaikki hinnat sis. ALV:n
Määräalennus
Hinta per kappale Säästösi Summa
239 € 1
229 € 4,2% 3
225 € 5,9% 5
Varastossa
1

6 Asiakkaiden arviot

4.2 / 5

Värisekoitus

Luminositeetti

Työnjälki

5 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
A
Good product, by tricky to connect (WDMX)
As7640 27.11.2025
Good product, but the user manual is incomplete. If a dot is blinking in the bottom right corner of the display, it means that a pairing has already taken place (probably at the factory) and that the device is waiting for its already assigned transmitter. To establish a link with a new WDMX transmitter, this pairing must first be erased. To do this, go to the “Ulrl” menu and hold down the “enter” button for 5 seconds. Only then will the Varytec accept a new pairing (by simply pressing the function button on the G5).
Värisekoitus
Luminositeetti
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
TA
Thomas A. 848 09.02.2022
hing des öfteren schon wochenlang outdoors. im winter. keine ausfälle oder probleme.

ich bin sehr zufrieden. auch das w-dmx funktioniert problemlos.
Värisekoitus
Luminositeetti
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
Ha
Jetzt auch draußen hell
Holger aus E. 12.04.2023
Wer eine einfache, praktische und preiswerte Lösung für eine Außenbeleuchtung ist hat sie hier gefunden.
Die Teile sind perfekt auf den Außeneinsatz getrimmt, stabiles Gehäuse, gute Abedeckungen der Anschlüsse. Dazu die Möglichkeit ohne noch mehr Verkabelung die Dinger per Funk zu bedienen ist einfach Spitze! Bequem aus dem Veranstaltungsraum noch eine ergänzende Außenbeleuchtung effektvoll dazu zu blenden ist genial.
Wir haben es mit einem Saal mit großer Fensterfront getestet, Signal wurde gut übertragen und der Effekt wenn man drinnen abdunkelt und dann draußen die Botanik illuminiert ist grandios.
Värisekoitus
Luminositeetti
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
J
Mega gut
JustinKu 11.04.2021
Wir sind absolut überzeugt von den Varytec Event Par IP65.
Sie haben eine sehr große Leuchtkraft und auch die Farben sind schön.
Einziges Problem: Wir haben es bisher nicht hinbekommen, diese mit dem dazu erhältlichen WDMX Sender zu verbinden - allerdings auch aus zeitlichen Gründen noch keine weiteren Versuche diesbezüglich unternommen.
Värisekoitus
Luminositeetti
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta