Stairville BossFX-3 Scan Pro B-Stock

All-in-One Lighting Effects Set

• For mobile DJs, events and stages
• Scanners, derby effects, PAR spotlights, strobes and lasers are combined in a light bar, enabling versatile light shows with minimal setup and dismantling effort
• 2x scanners with 15 W LEDs, seven gobos, eight colours,
• 2x Derby with 9 W RGB LEDs
• 2x PAR with 3 x 9 W RGB LEDs
• 4x strobe LEDs each with 1 W (CW)
• Laser: 100 mW red / 30 mW green
• Power consumption: 130 W
• Supply voltage: 100 – 240 V AC, 50 / 60 Hz
• Control: DMX, automatic programmes, music control, master/slave, IR remote control, wireless footswitch
• IP protection rating: IP20
• Housing material: Metal / plastic
• Mounting: 35 mm stand mounting
• DMX input and output: XLR 3-pin
• Power supply input and output: IEC
• Dimensions bar (W x H x D): 1190 x 275 x 85 mm
• Weight: 10.20 kg
• Housing colour: Black
• Includes stand (max. height: 2.5 m), transport bag, IR remote control (CR2025 button cell battery not included) and wireless footswitch (9V battery not included)

Note: This device contains a 3R Class laser or higher (according to the classification in accordance with DIN EN 60825-1:2015)

Important note: This laser only works with a safety switch (e.g. emergency stop switch Art. #604019). The included interlock plug is in an unbridged state and does not close the contact required to operate the laser.

For legal reasons, we advise against setting the interlock plug to the bridged state independently and using an emergency stop switch instead.

Further information can be found in DIN EN 60825-1:2015