Sivun sisältöön

RME Fireface 802 FS + SoundID

Bundle offer comprising

RME Fireface 802 FS

60-Channel USB 2.0 Audio Interface

  • 24-bit / 192 kHz
  • Built-in DSP mixer with effects section (EQ, dynamics and reverb)
  • 4 Analogue microphone preamps with gain control
  • Inputs remote controllable via software
  • TotalMix Remote
  • TotalMix FX mixing / routing
  • DigiCheck software
  • DC-coupled outputs - CV/Gate Voltage Control
  • Stand-alone operation with setup recall
  • ICC - Intelligent Clock Control
  • SteadyClock FS
  • +48V phantom power
  • Class compliant
  • Internal switching power supply, 100 - 240 V AC, 30 Watts
  • Construction: 19" / 1U
  • Dimensions (W x H x D): 438 x 44 x 242 mm
  • Weight: 2.8 kg

Connections:

  • 4 Mic/instrument / line inputs: XLR / jack 6.3 mm combo
  • 8 Line inputs: 6.3 mm jack balanced
  • 8 Line outputs: 6.3 mm jack balanced
  • AES / EBU input and output: XLR
  • Word clock input and output: BNC
  • 2 ADAT / S/PDIF optical inputs and outputs
  • 2 Stereo headphone outputs: 6.3 mm jack
  • MIDI input and output
  • USB
  • Remote connection for optional ARC USB (not included)

Sonarworks SoundID Ref Spk & HP w Mic BDL

Sonarworks SoundID Reference for Speakers & Headphones with Measurement Microphone (Box)

  • Bundle of measurement microphone and software for speaker and headphone calibration
  • Frequency response correction for studio monitors and headphones for the most linear playback possible
  • Enables better assessment of recordings and mixes
  • Room analysis and automatic room size calculation via numerous measuring points
  • Audio Calibration Engine for the most accurate adjustment
  • Any number of speaker profiles can be saved
  • Comes with calibration curves for over 280 different headphone models
  • Target curves can be customized in real time
  • Translation Check simulates over 20 different devices and device types for the accurate implementation of a mixture
  • Three selectable filter modes: Zero Latency
  • Mixed and Linear Phase to optimize filter quality and latency for different listening situations
  • Additional settings for mono
  • Dry/Wet and Safe Headroom
  • Only available in the app: MIDI mapping for various parameters and user presets for predefined output configurations
  • Measuring microphone with pre-polarized electret condenser capsule
  • Frequency range: 20 - 20000 Hz with measurement protocol
  • Polar pattern: Omnidirectional
  • Sensitivity: 14mV / Pa
  • Inherent noise: 24 dB
  • Signal-to-noise ratio: 70 dB
  • Dynamic range: 106dB
  • Maximum sound pressure level: 132 dB SPL
  • requires 48V phantom power
  • Connection: XLR 3-pin
  • Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software
  • Calibration file for 0° on-axis measurements in TXT format
  • Myynnissä vuodesta Marraskuu 2026
  • Tuotenumero 658901
  • Myyntierä 1 kappaletta
  • Recording / Playback Channels 30x30
  • Number of Mic Inputs 4
  • Number of Line Inputs 12
  • Instrument Inputs 4
  • Number of Line Outs 8
  • Headphone Outs 2
  • Phantom Power Yes
  • Number of S/PDIF Connectors 2
  • Number of ADAT Connectors 2
  • Numer of AES/EBU Connectors 1
  • Number of MADI Connectors 0
  • Ethernet 0
  • Other Connectors None
  • MIDI interface Yes
  • Word Clock 1xIn, 1xOut
  • Max. Sampling Rate in kHz 192 kHz
  • Max. Resolution Rate in Bits 24 bit
  • USB Bus-Powered No
  • Incl. power supply Yes
  • USB Version 2.0
  • Width 483 mm
  • Depth 242 mm
  • Height 44 mm
  • Connection Format USB port Type B
  • Included in delivery Power Cable, USB-A to USB-B Cable, TOSlink Cable
  • Zero latency monitoring Yes
1 799 €
Kaikki hinnat sis. ALV:n
Varastossa
1