MA Lighting grandMA3 onPC C+F Wing Bundle

Bundle offer comprising

MA Lighting grandMA3 onPC Command Wing

Lighting Control Desk

• Real-time control of 4096 parameters in combination with the free grandMA3 onPC software
• Command section layout identical to grandMA3 compact models
• 29 Rotatable RGB backlit encoders
• 5 Dual encoders
• 10 Motorised 60 mm faders
• 40 Independent playbacks
• 16 Assignable x-buttons
• 2 Backlit and motorised A/B 100mm faders
• 1 Level wheel
• Individually backlit, dimmable and silent (clickless) buttons
• Easily connects via USB to any PC with grandMA3 onPC
• Incl. dust cover, 2m USB2.0 cable and magnetic label strip for 10 faders

Note: A grandMA3 onPC system supports a total maximum of 4096 parameters.

Technical data:

• Parameters: 4096 (HTP/LTP)
• Parameter Mode2: none
• Supply voltage: 100-240 V / 50/60 Hz
• Power: max. 50 VA
• Dimensions (W x D x H): 620 x 427 x 102 mm
• Weight: 10 kg

Connections:

• 1x IEC-60320 C14 mains plug
• 2x DMX512-A Out (5-pin XLR female)
• 1x DMX512-A In (5-pin XLR male)
• 1x MIDI In (5-pin DIN female)
• 1x MIDI Out (5-pin DIN female)
• 1x Linear Timecode In (3-pin XLR female)
• 1x GPI General Purpose Interface (D-SUB DE9 female) for remote control
• 1x USB 2.0 (type B)
• 1x LED desk light (4-pin XLR female)

MA Lighting grandMA3 onPC Fader Wing

Fader Module for Lighting Control

• Real-time control of up to 2048 parameters in combination with grandMA3 onPC
• Expandable to up to 4096 parameters with grandMA3 onPC products and grandMA3 onPC
• 20 rotatable RGB backlit encoders
• Ten motorised 60 mm faders
• 40 independent playbacks
• Individually backlit, dimmable and low-noise (clickless) buttons
• Includes dust cover, magnetic labelling strip for ten faders, 2.0 m IEC cable with open end and 2 m USB 2.0 cable
• Suitable case: Art. 520330 (not included)

Technical data:

• Parameter: 4096 (HTP/LTP)
• Parameter Mode2: None
• Supply voltage: 100-240 V / 50/60 Hz
• Power: Max. 50 VA
• Dimensions (W x D x H): 240 x 427 x 102 mm
• Weight: 5 kg

Connectors:

• One IEC-60320 C14 mains plug
• Two DMX512-A outputs (XLR 5-pin female)
• One USB 2.0 (type B)
• One LED desk light (4-pin XLR female)

Note: One grandMA3 onPC system supports a total maximum of 4096 parameters.

Thon GrandMA3 Command + Fader Wing

Workstation Case

• Suitable for grandMA3 onPC Command Wing and one Faderwing 3
• Material: 6.8 mm Multiplex coated
• 30 x 30 mm aluminium edge
• Eight medium-sized butterfly latches
• Five medium-sized folding handles
• Seven medium-sized rounded ball corners
• One corner castor: 75 mm
• One edge roll: 75 mm
• Four rubber feet: 38 x 33 mm
• Two rubber feet: 38 x 25 mm
• Space on the left for Faderwing, on the right for Command Wing, with a monitor bridge above, suitable for two monitors
• Maximum dimensions per monitor: 557 x 361 x 62 mm
• 160 mm deep cable duct at the rear
• Pull out keyboard shelf at the bottom
• Foam padding
• Exterior dimensions (W x D x H): 1260 x 670 x 378 mm
• Weight: Approx. 38.4 kg
• Colour: Black (RAL 9004)
• Made in Germany