Sivun sisältöön

Eurorack Module

  • Dual VC Polariser
  • channel polariser
  • VCA
  • Inverter
  • Ring modulator
  • Per channel: manual control (gain range -1 to +1), CV attenuator, CV input, CV modulation input, signal input and output
  • Power requirement: 20 mA (+12 V) / 20 mA (-12 V)
  • Width: 4 HP
  • Depth: 40mm
  • Myynnissä vuodesta Elokuu 2020
  • Tuotenumero 499436
  • Myyntierä 1 kappaletta
  • Switch Modul No
  • CV-Editor/VC-Processor Yes
  • Tools Yes
  • Width 4 TE / HP
99 €
Kaikki hinnat sis. ALV:n
Varastossa
1

10 Asiakkaiden arviot

4.4 / 5

Käyttö

Ominaisuudet

Työnjälki

6 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
S
Another "Dual" star from Doepfer
SurreyMuso 24.09.2026
I'm a big fan of Doepfer's Dual modules (too many to list here). Generally, they are simple utility modules in a compact form factor but small knobs can make setting accurate values difficult (I prefer Pete Townshend's steering wheels).

The A-133-2 gives you 2 VC attenuverters so you can use it for true Amplitude Modulation, inverting, cross fading, scaling and so on. It's a many-trick pony.

Couple of things could improve it. A detent for top dead centre (either side of 0 reverses values), summing output, and more space. If it's fully patched, it's not easy to use or to repatch. I'm a studio modular chap, so space is not the same kind of problem as gigging wigglers have and I'm always disappointed when HP ends up being more important than usability.

For what it contains, it's really good value but I'd gladly spend a bit more to have full sized knobs and a bit more room between sockets.
Käyttö
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
A
The manual middle settings are not 'in the middle'
Airell 24.08.2020
The centre point (0) of the manual knobs are not near the middle. They are at ~ +0.7. To rotate them visually 'in the middle', you need to use the dual light LED for that.
Käyttö
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta