Sivun sisältöön

Replacement Cable

  • Connector cable for DT-770 PRO / 990 PRO / 880
  • Smooth model
  • With gold-plated 3.5 mm stereo jack and adapter (M5 threads) 3.5mm to 6.3 mm jack
  • beyerdynamic Nr.: 905771
  • Myynnissä vuodesta Tammikuu 2009
  • Tuotenumero 222427
  • Myyntierä 1 kappaletta
  • Length 3 m
  • Coiled Cable No
  • Straight Cable Yes
  • Input connector Jack 3,5mm TRS male
  • Output Connector Other
16,90 €
Kaikki hinnat sis. ALV:n
Varastossa
1

138 Asiakkaiden arviot

4.6 / 5

Työnjälki

Käsittely

79 Arvostelut

K
Kitaramies 11.08.2026
Vaihdoin hajonneen DT-880 Pro -kierrekaapelin tilalle tämän suoran kaapelin. Vaihdon vaikein osa ei suinkaan ollut johtojen kolvaus paikalleen, se sujui viidessä minuutissa, vaan vedonpoistoklipsin saaminen sujahtamaan paikalleen. Kaveri tai pienet kulmapihdit suositeltavaa... Onnistuihan se lopulta sormivoiminkin. Hyvin vaikuttaisi kaapeli toimivan, ehkä hieman ohuempi kuin alkuperäinen... :)
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

T
A good replacement cable
Tresque 29.07.2021
Not as nice as the old cable on my DT-770, but fills out the same job. The construction is simplified.

The jack adapter is different from some older ones in DT-770 pro's, so old adapters won't fit these new cables. The cable comes however with its own adapter, so there isn't a real problem.
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
D
So far so good.
DeezjaVu 14.07.2019
Original DT-770 cable snapped near where it enters the earcup, so glad I found a replacement for it.
The replacement cable is a bit stiff, but it's not too bad. Hopefully this one will last, but if not, I know where to get a replacement.
Käsittely
Työnjälki
2
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
CN
Quality spare parts from Beyerdynamic
CED Nates 02.04.2024
After watching some tutorials on YT, I find this product easy to replace.
Tip to replace the cable :
- use a a soldering iron with a flat head
- Wires :
1. Black wire on the new cable equals copper-colored wire (old cable)
2. Middle part : red wire on the new cable equals red wire (old cable)
3. White wire on the new cable equals blue wire (old cable)
- do not desolder the copper and white wires from the right side of your headphones but do this :
- Cut the wires with scissors from the old cable
- Remove the old cable and place your new cable
- There will be a silver pin to remove with pliers
- Place the new cable.
- Put the new silver pin to hold the new cable (delivered with your new cable)
Solder the wires of your new cable on top of the wires from the right side of the headphones (copper cable and white cable on my headphones)
- Test your headphones to see if you got sound on both ears
- Put everything back

That's it ! Good luck
Käsittely
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta