Sivun sisältöön

Switched-mode Power Supply Amplifier

  • 4x 550 W/ 4 Ohm
  • 4x 350 W/ 8 Ohm
  • 2x 1000 W/ 8 Ohm (bridge mode)
  • XLR inputs
  • Speaker twist outputs
  • Dimensions: 482 x 277 x 88 mm
  • Size: 19"/ 2 RU
  • Weight: 7.5 kg
  • Myynnissä vuodesta Toukokuu 2014
  • Tuotenumero 325986
  • Myyntierä 1 kappaletta
  • Power (4 Ohms) per Channel 550 W
  • Channels 4
  • Rack Units 2 U
  • Amp Class Class H
  • 2 Ohm stable No
  • DSP/Crossover No
  • Convection cooling No
  • Width 482 mm
  • Depth in mm 227 mm
  • Height 88 mm
  • Weight 7,5 kg
  • Bridged Mode Yes
  • Input XLR Yes
  • Parallel Input Yes
  • Link Out No
  • Output Speaker Twist Yes
345 €
Kaikki hinnat sis. ALV:n
Varastossa
1

161 Asiakkaiden arviot

4.6 / 5

Käyttö

Ominaisuudet

Ääni

Työnjälki

91 Arvostelut

R
Kotikäytössä
Razerbone 13.09.2025
Asennettu AV-vahvistimen taakse antamaan voimaa bassoille. Hyvin potkii 2x15" elementtejä jotka ovat 2x4Ohm.
Yksi tähti lähti koska piti hommata ART cleanbox Pro väliin huminan takia, koska signaali lähtö on RCA.
Käyttö
Ominaisuudet
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
tm
great amp overall
tsope mustakis 27.10.2019
bought it for home use on a diy 2 way speaker with active crossover (xilica xp-4080). i know i know, it's a overkill. but i wanted a 4 ch class h amp. this amp sounds awesome. very clear, almost no noise at all even though it is so powerful (with the volume knob at max i need to put my ear on the tweeter to here the hiss and even then it is super low, for a 550w amp this is impressive) only problem i had was as i opened the amp to replace the fans (they are audible in a room but since they can change their speed they very silent, but not enough for a room) 4 of the case screws was jammed and i ended up having to drill them out (i did used the correct screw driver) other than that can't fault this amp, and for the money it's a steal... update... i have changed the fan to Noctua fans but still, it was too noisy for a room. in the end i have flipped the fans so now they blow air in instead of sucking it out, i also removed the filters from the front and got fan grills with a filter for the fans. now i finally have silence
Käyttö
Ominaisuudet
Ääni
Työnjälki
9
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
UA
Failed at 3 years old
UK AV User 26.03.2022
A very useful amp with good linking features but unfortunately completely ruined a gig by overheating the PSU and failing whilst being used lightly (no problem with speakers) just a couple of months past the 3 year warranty. If I'd taken 2 x 2 channel amps I would have had redundancy and been able to complete the gig. Cheap for a reason I guess
Käyttö
Ominaisuudet
Ääni
Työnjälki
1
1
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
y
A solid 4 channel AMP
yanickflyer 21.12.2020
Use:
I am using it to power 2 passive speakers and planning to buy two passive speakers to completely use the full 4 sets of channels

Pros:
4 channels means up to 4 speakers which is a deal in terms of features
Also being a bridge capable AMP means you can have two speakers on bridge mode instead of only one. If you want this kind on configuration this AMP is perfect for you

Cons:
I do not recommend to use the AMP as the way I am using now. I will be changing amps down the line. Using only 2 channels AMPs.
I have recently had one of the channels failed on me which is pretty common with the type. It is not really an issue but sending it repairs means I would be able to power any speaker
So you should bare this in mind
Käyttö
Ominaisuudet
Ääni
Työnjälki
2
1
Raportoi ongelmasta

Raportoi ongelmasta