Sivun sisältöön

Stereo Multi-Effects Processor

  • 15 selectable effect algorithms, including reverb, granular reverb, granular shimmer, lo-fi delay, micro loops, flanger, tape simulation, compressor, overdrive, filter and more
  • Four parameters per algorithm can be adjusted on the device or controlled via CV input (3.5 mm jack)
  • Mix control with CV input (3.5 mm jack)
  • Controls for input and output levels with signal LEDs
  • Audio processing with 24 bit / 48 kHz
  • Frequency range: 10 Hz - 22,000 Hz
  • Stereo audio input: 2 x 6.3 mm jack, TRS
  • Stereo audio output: 2 x 6.3 mm jack, TRS
  • Solid metal housing
  • Dimensions (W x D x H): 220 x 170 x 70 mm
  • Weight: 1.5 kg
  • Colour: Black
  • Includes 12 V DC power supply
  • Myynnissä vuodesta Joulukuu 2025
  • Tuotenumero 632764
  • Myyntierä 1 kappaletta
  • Bass Pedal No
  • Breath Controller No
  • MIDI Controller No
  • Filter Yes
  • Effects Yes
  • Sequencer No
  • Product Specific Expansion No
655 €
Kaikki hinnat sis. ALV:n
Varastossa
1

10 Asiakkaiden arviot

4.7 / 5

Käyttö

Ominaisuudet

Ääni

Työnjälki

8 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
J
your best sound design tool to start with
JDSP 07.04.2026
I was looking for my first multi-effects unit to experiment with sound design in music production, and this turned out to be the right choice thanks to its 15 available effects. At first I was aiming for analog, but after watching several demos and hearing the sound quality, whether it was analog or not stopped mattering to me. The limitation of using only one effect at a time is easily overcome by recording in multiple passes. Its real strength is simplicity: few controls, immediately usable sounds, and effective results on any source. The wavefold effect is incredible, as is the pump compression.
Käyttö
Ominaisuudet
Työnjälki
Ääni
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
K
excellent all-in-one fx for my vinyl setup
Katze_DC 15.02.2026
I'm really enjoying this Soma Warp. I have it on the send/return of my vinyl setup for a plethora of interesting fx that I can easily switch. From reverbs to delays to glimmer/shimmer niceness. Really happy with the sound quality. Similar to the Soma Cosmos I own.
Käyttö
Ominaisuudet
Työnjälki
Ääni
2
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
MS
Warp )))))
Mister Stefan 22.01.2026
Wie immer bei SOMA: top verarbeitet, exzellenter Klang und experimentelle Attitude.
Käyttö
Ominaisuudet
Työnjälki
Ääni
4
1
Raportoi ongelmasta

Raportoi ongelmasta

google translate fr
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
b
très bien-complémentaire au cosmos
bleuandroid 19.04.2026
la fabrication est très bien , un châssis en métal comparable au cosmos ou au lyra8. Il a son poids.
Pour l'utilisation, il est parfait dans un environnement SOMA, (ornament8,lyra8,pulsar23,cosmos..) l'intégration est parfaite; il ne va pas sur les plates bandes du cosmos - les effets sont atypiques et fait à la manière d'un cosmos - des effets qui peuvent auto oscillées, des rendus éthérés, qui s'estompent. C'est parfait pour créer des ambiances et du volume ,relief.
Les entrées Cv sont bien pensées pour l'intégration avec des clocks d'un pulsar par exemple, ou autre module eurorack.

Lors de l'utilisation, on peut rester des minutes sur le même effet -
je l'utilise derrière un lyra 8 , j'utilise également un cosmos sur un deuxième lyra - les 2 se complètent parfaitement et offrent du relief dans le résultat-

Il y'a un port USB à l'intérieur du châssis - pour d'éventuelles mises à jour du firmware.

pour mon usage, avec des pulsar23, des ornament8,lyra... c'est parfait -ca s'intègre parfaitement.
Käyttö
Ominaisuudet
Työnjälki
Ääni
1
0
Raportoi ongelmasta

Raportoi ongelmasta