Sivun sisältöön

3 - Pole Angle Jack Plug 6.3 mm

  • Gold-plated contacts
  • Black shell
  • Myynnissä vuodesta Helmikuu 2007
  • Tuotenumero 108378
  • Myyntierä 1 kappaletta
  • Installation No
  • Mono/Stereo Stereo
  • Angled Yes
  • Type TRS (stereo/sym.)
  • Plug Jack 6,3 mm TRS male angled
7,50 €
Kaikki hinnat sis. ALV:n
Varastossa
1

406 Asiakkaiden arviot

4.9 / 5

Työnjälki

137 Arvostelut

J
Erittäin hyvä plugi!
JJK 25.01.2016
Tämä on erittäin hyvä ja kestävä plugi, - taattua Neutrik-laatua. Asennus on helppoa, mikäli olet vain kolvaustaitoinen. Johto pysyy jämäkästi ja vedonpoisto on erittäin laadukkaasti toteutettu. Soundi on käytännössä häviötöntä, riippuen toki kaapelista. Plugi sopii kohtuu pieniin tiloihin, esim. vahvistimen looppeihin tai pedaalilautaan.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

A
Best plugs around
Tuntematon 02.02.2017
Neutrik doesn't let you down when it comes to durable plugs. The strain relief mechanism make the plugs durable in stage conditions and the metallic housing ensures that they can take a beating every now and then.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
b
Replacement for earphones
busy_b 06.02.2020
I was bothered with the straight connector of my headphones sticking out of soundcard ready to be broken away by any careless move and cable at right angle prone to breakage. So I've bought this Neutrik NP3, my friend electrician helped me to replace the connector and I have much safer connection now. The jack fits better and in my opinion the sound is better, too. It was worth the effort.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
aT
Works great with sample pads
a Tamás 30.05.2026
Pros
Any device with lots of TRS inputs and outputs on its back laid out horizontally, such as drum modules and sample pads, will benefit from using angled connectors like this. Cables are nicely hidden, don't get struck, bent or pulled out as easily as straight ones.
I have paired this connector with the BPX-L large chuck and boot and used it on a 7.6mm diameter cable. It somehow works better with a large cable size than the slimmer straight connector NP3 X-B does.
Cons
The tip and ring pins are quite close to each other and there is a piece of plastic separating them, so one has to be careful not to melt that.
The 2 parts of the shell may slide apart and create a gap as you tighten the boot unless you hold them together tightly. Even if done properly there still is a small gap between the 2 parts of the shell where water or vapor may enter.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta