Sivun sisältöön

Universal Tablet Holder

  • Suitable for tube diameters of up to 30 mm
  • Clamping range: 158 - 280 mm (narrow side) or 150-330 mm (wide side)
  • Inclination: 0° to 90°
  • Tablet size: Approximately 10" to 16"
  • For tablets with protective cover or case of up to 20 mm
  • Adjustable clamping brackets
  • Rotatable for portrait and landscape format
  • Material: Steel, bio-based plastic (content of more than 50% and up to 100% renewable vegetable raw materials)
  • Weight: 0.75 kg
  • Colour: Black
  • Myynnissä vuodesta Kesäkuu 2021
  • Tuotenumero 522358
  • Myyntierä 1 kappaletta
  • Type Tablet Mount
  • suitable for Universal
  • Diagonal of 10"
  • Diagonal up to 16"
  • Fastening Clamp
  • Rotating Yes
B-Stock 45 € saatavilla
52 €
Kaikki hinnat sis. ALV:n
Varastossa
1

36 Asiakkaiden arviot

4.4 / 5

Työnjälki

24 Arvostelut

L
Toimii pikkuläppärillekin
Lebe 28.11.2023
Etsin pitkään telinettä, johon mahtuu tabletin sijaan pikkuläppäri. Rumpujen takana kun ei kerkee scrollata sivulta toiselle, niin pitää olla isompi näkymä. Tähän mahtuu. Ainakin mun läppäri. Käyttänyt vuoden. Käytössä pari kertaa kuussa. Pääasiassa keikoilla. Pysyny ehjänä vaikka matkustaa ständilaukussa rautojen seassa. Ei moitittavaa.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
E
Great but no cigar.
Electricbacfac 23.05.2022
This is a reliable and highly sturdy stand. That's part of the problem though, it's a little heavy for transporting around. It's very well made but the arm is a little too solid for me. I'm using a 10" tablet and this holder really is designed with the largest of tablets in mind. I am using it in portrait mode with my 10" tablet which is very good. However the rotation is only 90 degrees and I'd like to have it a few degrees right of centre but you can't which is frustrating. 180 degrees of rotation would be better. The rotation joint is also a bit large for fitting in a pocket of a bag, very well made but just arkward to travel with. However I'm happy with the holder and it is excellent quality. Suits the upright of a stand but not the boom arm as its too heavy. Basically it's great for 14" tablet I think. I have not actually tried it though. My tablet is 10".
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
M
Good but not for 13" in
ManGr 02.07.2025
Good quality but if you want to put a 13" tablet vertically, the clamping is not enough. You have to rotate the holder and on the bottom will be the small metal "hook"
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
D
Toller Allrounder unter den Tablethalterungen
David3970 01.12.2022
Super Halterung, passt genau für meine Zwecke!

Es gibt zwar gute Halterungen für bestimmte iPad-Modelle, aber wenn man eine Schutzhülle oder ein Smart Cover verwendet wird das iPad dann natürlich dicker und breiter, so dass die Halterung dann nicht mehr passt.

Dieses Modell löst das Problem, es ist sehr einfach auf verschiedene Größen einstellbar und die Auflagentiefe für die meisten Hüllen leicht ausreichend; ich verwende ein iPad 7 mit Smart Cover, die Klappe nach hinten umgeschlagen, und das geht sich wunderbar aus.

Sämtliche Gelenke sind sehr leicht einzustellen und können mit wenig Kraft sicher fixiert werden, wie ich das von K&M gewohnt bin.

Zum Querstellen des Tablets einfach das Ding nach links kippen, fertig!
Hier muß man nicht einmal an einer Schraube drehen...

Gut ist auch das man hier beim fixieren der Halterung sehr flexibel ist was den Rohrdurchmesser betrifft.

Also mein Fazit:
- tolle Halterung in gewohnter K&M-Qualität
- Hält bombenfest
- flexibel bei der Tablet-Größe und beim Rohrdurchmesser
- schnell kippbar fürs Querformat

Über dieses Produkt kann ich nichts negatives sagen, klare Kaufempfehlung!
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta