Sivun sisältöön

Dynamic Microphone Booster

  • For dynamic or passive ribbon microphones
  • Gain: 25 dB
  • Power supply via phantom power
  • Frequency range: 10 - 20,000 Hz (± 1 dB)
  • Input and output: XLR
  • Dimensions: 24 x 25 x 78 mm
  • Weight: 100 g
  • Myynnissä vuodesta Toukokuu 2020
  • Tuotenumero 474739
  • Myyntierä 1 kappaletta
  • Channels 1
  • Number of microphone inputs 1
  • Instrument input No
  • Tubes No
  • Compressor/Limiter No
  • Equalizer No
  • De-Esser No
  • Phantom power No
  • Phase Reverse No
  • External effect loops No
  • Analogue Outputs XLR
  • Digitale Outputs 0
  • Headphone connection No
  • Level Meter No
  • Design Adaptor
31 €
Kaikki hinnat sis. ALV:n
Varastossa
1

206 Asiakkaiden arviot

4.6 / 5

Käyttö

Ominaisuudet

Ääni

Työnjälki

155 Arvostelut

LS
Löytö Studio 23.06.2022
Works fine, and inexpensive. For it's price, it is a well working and easy enhancement for using dynamic mics in cost efficient professional podcasting from locations with background noise. I have around 10 of these, out of which in one I have noticed a subliminal high frequency hiss, only detectable with meters.
Käyttö
Ominaisuudet
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

L
Khyl
Latealgabyo 30.08.2021
Toimii kuin junan vessa. Apinan oli vaikea eka ymmärtää että palikka tulee mikin perään, ei mikseriin.. Mutta kiitos asiakaspalvelulle pelastamisesta.
Käyttö
Ominaisuudet
Ääni
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
PR
pretty good.
Peter R. 438 18.01.2022
This gives me around 1/4 turn more, on (most of) my pre gain knobs, audio technica mic.
I have listened hard and cannot hear any conceivable sound colouring to my voice/harmonica, but mic'd up guitar/mic booster does sound a little "compressed", a few tweaks on the eq and the guitar sounds great. Passive DI & electric guitar, with this inline are "OK" too, but passive DI's tend to compress a little.
I like to see people at the back talking while I perform, so I don't "blast" the punters, any small variations in my "preferred sound" are not too important. A little Sound colouring doesn't matter at all to most live performer's.
So this mic pre is a great weapon to have in the bag when using "house PA's".
Käyttö
Ominaisuudet
Ääni
Työnjälki
4
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
G
Protect your ribbon mic and give it a boost!
GuitarOil 03.04.2022
EDIT: These are very prone to breaking. I have gone through 2 of them. The release switch for the XLR cable is what tends to go. It is pretty scary when one of these is stuck inside of a microphone worth 10x the CT1. Maybe invest in something else. Also, just add an extra cable between the mic and the CT1 if you are going to use it.

I was living in constant fear of accidentally feeding my ribbon +48v Phantom Power by accident; now I don't. This is a great solution to protect your delicate mics while also reducing the need to add incredible amounts of preamp gain to hear them properly.
Käyttö
Ominaisuudet
Ääni
Työnjälki
8
0
Raportoi ongelmasta

Raportoi ongelmasta