DL
Awesome solution
I quite frankly wonder how such a handy thing did not come for sale any earlier. Having my wah on the board has always been a pain, mostly due to the fact that its rubber feet won't allow it to solidly get stuck on velcro. This means any time I'd pick up my board and hold it vertically, the wah, which is fairly heavy, would disconnect and fall off, dragging whatever cabling and other pedals would manage to bring down with it. Annoying as hell to say the least.
These 2 little pads simply solve the problem, the only advice I have however, is to make sure you have longer spare screws for the base of the wah. The wooden/velcro feet require slightly longer screws.
For the rest, top score for this simple yet unbelievably useful product.
These 2 little pads simply solve the problem, the only advice I have however, is to make sure you have longer spare screws for the base of the wah. The wooden/velcro feet require slightly longer screws.
For the rest, top score for this simple yet unbelievably useful product.
1
0
Raportoi ongelmasta
7D
Awful
Mounting these to a wah pedal, there's no supplied screws, using the screws from the wah, the holes are too big, and the screws will break/split the wood. So it gets a 1 star for the mounting. Simply adding a screw set cmpatible with dunlop or other wahs, and some washers to protect the wood would make this a much much much better product. As it stands, I had ordered 3 sets, and all of them have gone in the bin.
Once you do have them mounted (somehow) and put on board, removing from board, the velcro sticks really well, to the point that if you get it off, the screws will most likely split the wood, and these plates will still be on your board, and the wah in your hands, so effectively they last one, maybe 2 board removals before they're dead.
Waste of money. If you want a solution for mounting a wah on a pedalboard, go look at the mission engineering mounting kit instead as these are not worth it.
Only positive is that the velcro sticks really well.
Once you do have them mounted (somehow) and put on board, removing from board, the velcro sticks really well, to the point that if you get it off, the screws will most likely split the wood, and these plates will still be on your board, and the wah in your hands, so effectively they last one, maybe 2 board removals before they're dead.
Waste of money. If you want a solution for mounting a wah on a pedalboard, go look at the mission engineering mounting kit instead as these are not worth it.
Only positive is that the velcro sticks really well.
4
0
Raportoi ongelmasta
D
Brilliant idea
I bought this as a way to velcro my cry baby wah to my Harley Benton spaceship. Its really cool, the wah has feet that when removed in order to attach velcro, end up leaving the screws poking out and making it an uneven surface for the velcro. The great little wedges are screwed on in place of the wah feet and come with velcro already attached.
Stuck to my board with ease. Cant recommend these enough.
Pros.. easy to use, very good price.
Cons.. ive had no issue
Stuck to my board with ease. Cant recommend these enough.
Pros.. easy to use, very good price.
Cons.. ive had no issue
1
0
Raportoi ongelmasta
DI
Cheap execution of a good idea
I bought this product because I was too lazy making my own cry baby pedal board feet, and too cheap to buy a more expensive one, and that has indeed been biting me on the buttocks. These feet are clearly made extremely cheap, which is just okay with me. For the price I paid and with how lazy I am I don't mind the cheap materials, however, the routing around the holes were too shallow, so installing the feet was quite a hazzle. You get what you pay for with this product. But it works once it's finally on.
0
0
Raportoi ongelmasta
D
Sturdy
Was constantly having issues with my wah slipping about on my board. I'd made some cardboard spacers to do the same job as these, but they fell apart and got soggy with beer.
So these sorted that issue. Wah is now securely fixed to the board.
So these sorted that issue. Wah is now securely fixed to the board.
0
0
Raportoi ongelmasta
A
I've needed something like this for ages now
Such a simple solution to a pedalboard problem that's bugged me for ages.
I have a Fulltone Wah and Fulltone MDV3 which I use the Wah Fastener with.
Important: the holes for the screws did not line up with the screwholes on the Fulltone products, but it was really easy to drill holes with the correct spacing so just hold that in mind when buying these - you might need to modify it but all you need is a hand drill and 5 minutes to spare.
I have a Fulltone Wah and Fulltone MDV3 which I use the Wah Fastener with.
Important: the holes for the screws did not line up with the screwholes on the Fulltone products, but it was really easy to drill holes with the correct spacing so just hold that in mind when buying these - you might need to modify it but all you need is a hand drill and 5 minutes to spare.
0
0
Raportoi ongelmasta
s
Exactly what it says
I bought this cautiously having considered the many negative reviews but figured that for a fiver I might as well chuck it in the basket with some other items I was needing.
Happy to report that it does exactly what it says it should and I had 0 problems at all. The velcro is fine, the wood is fine, the holes are fine, the screws fit fine and the actual fit of the mounts to the pedal itself is perfect (mission expression pedal, so standard crybaby size).
Overall I'm very happy with it, I'm glad I bought it and I wouldn't hesitate to purchase more if needed
Happy to report that it does exactly what it says it should and I had 0 problems at all. The velcro is fine, the wood is fine, the holes are fine, the screws fit fine and the actual fit of the mounts to the pedal itself is perfect (mission expression pedal, so standard crybaby size).
Overall I'm very happy with it, I'm glad I bought it and I wouldn't hesitate to purchase more if needed
0
0
Raportoi ongelmasta
T
Hyvä tuote, mutta vaatii säätöä että toimii
Nyt kun sain asennettua nuo palat Crybabyn alle, niin ne on hyvät, siitä viisi tähteä. Ongelma vaan oli, että Crybabyn omat ruuvit ovat aivan liian lyhyet, joten piti ostaa uudet ruuvit. Koska ruuvit ovat tuumakokoa, niin oli vähän vaikeaa löytää sopivat, mutta Fenderin mikrofonin korkeussäätöruuvit olivat ainakin juuri oikean kokoiset, joten ostin niitä läjän paikallisesta musiikkiliikkestä. Tosin ruuvit olivat nyt sitten liian pitkät, joten lyhensin ne. Lisäksi ruuvin ja puun väliin on laitettava aluslevyt, muuten tuo vaneri halkeaa. Näiden toimenpiteiden jälkeen tuote on ensiluokkainen ja tekee juuri sen minkä sen kuuluu tehdä.
0
0
Raportoi ongelmasta
C
Gets The Job Done
Little pieces of laminated wood. The screw holes are drilled out almost to the point of failure. But, they fit. They hold. They stick to the board well enough. And, they are _very_ affordable. If you have a Dunlop Cry Baby format wah pedal ... these are a great buy. I tossed the little rubber feet into the battery compartment for safe keeping.
0
0
Raportoi ongelmasta
S
Works like a charm!
This works perfect in case you want to put your crybaby wah on your pedalboard. Best and easiest solution I've seen. Also no quality questions, as it literally is just a piece of wood and velcro.
A no brainer if you have a flat pedalboard. If you have an angled board, beware the wah's gonna be at a different angle. Hasn't been an issue for me, fortunately.
A no brainer if you have a flat pedalboard. If you have an angled board, beware the wah's gonna be at a different angle. Hasn't been an issue for me, fortunately.
0
0
Raportoi ongelmasta