Sivun sisältöön

Potentiometer

  • 500 kOhm
  • Logarithmic
  • Knurled shaft (split shaft)
  • CTS potentiometers are the first choice for many American guitar models
  • Low tolerance for reduced variation and greater accuracy
  • Total height: 30 mm
  • Overall diameter: 23.5 mm
  • Thread length: 9.5 mm
  • Thread diameter: 9.5 mm
  • Shaft diameter: 6.35 mm
  • Allparts no. EP-0086-000
  • Myynnissä vuodesta Huhtikuu 2017
  • Tuotenumero 411573
  • Myyntierä 1 kappaletta
  • Design Split Shaft US
  • Resistance Value 500 kOhms
  • Characteristic Curve Logarithmic
  • Thread Length in mm 9,0 mm
  • Tandem Poti No
  • Push/Push No
  • Solderless No
  • shaft type grooved
9,90 €
Kaikki hinnat sis. ALV:n
Varastossa
1

333 Asiakkaiden arviot

4.7 / 5

Työnjälki

137 Arvostelut

m
Hyvätuntuinen ja jämäkkä
mahtosalo 10.05.2022
Laatupotikka, no problem. Muista että halkaisija se isompi. Saatat joutua poraamaan aukkoa kitarassa suuremmaksi.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
T
Good quality pots but definitely not "low tolerance".
TCSMD 11.10.2021
These are good quality pots, as expected from CTS. The tolerance isn't quite as tight as I would ideally want though. I normally buy CTS pots with tighter tolerances from other sources but I was running out of 500k pots and didn't have a new shipment coming in soon enough for a couple of jobs with high priority so I took a chance on these.

The actual values I got varied from 481k to 542k which isn't really tight enough for my needs. If one of my customers specifies 500k for an electronics upgrade I need the actual values to be a little closer than this. I guess it's within the tolerance for standard CTS pots but Thomann have these pots listed as "low tolerance" which they are most definitely NOT so that's one star off the total ratings for the misleading marketing.

To sum it up: The quality of these pots is very good but if you need them to actually be close to 500k you had better look elsewhere for pots with tighter tolerances (or buy a lot of them and hope you win the lottery).
Työnjälki
8
2
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
N
Excellent touch
NunoPacheco 17.01.2026
Very good and smooth working. It is stable and reliable.
No sound interference at all. I recommend.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
S
range issue
Steph000 04.03.2023
Used as a tone pot with a fender .022uf capacitor mounted as typical 60s wiring, I get almost an on/off effect around 1 most of the course having close to no effect on sound.
Not sure if the pot or the capacitor is in cause.
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta