Sivun sisältöön

Combined Guitar Tool

  • Suitable for Gibson Guitars US
  • Key for truss rod 8.3 mm Allen key
  • Phillips screwdriver
  • 7.94 mm, 5/16"
  • Myynnissä vuodesta Heinäkuu 2009
  • Tuotenumero 230011
  • Myyntierä 1 kappaletta
8,50 €
Kaikki hinnat sis. ALV:n
Varastossa
1

503 Asiakkaiden arviot

4.7 / 5

Työnjälki

220 Arvostelut

M
Kaularaudan säätöä
Motti 01.06.2017
Tuote toimii hyvin Gibson Les Paul Standardissani.Hinta-laatu suhde on erinomainen. Sopivan pienikokoisena mahtuu hyvin kitaran huoltokoteloon tai kitaralaukkuun.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

tw
Sopii..
the who 15.02.2018
...täysin omaan Gibson Les Paul Studioon. Toimii!
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
A
Thomann Gibson Truss Rod Key
Tuntematon 04.05.2016
I use this truss rod key mainly for adjusting truss rods. However, being a bit of a loose canon, I have also used it to adjust other things including various screws and two-force members. While the description says that this is a key please be warned that the implement is less effective in this role. For example, when I lost the keys to a hire car recently it was the first thing I reached for. However, I found I had to hit it with a hammer to get it to fit into the door lock and also use a large pair of pliers in order to apply sufficient rotational force to satisfactorily engage the lock. A hammer and pliers are not provided with this product - you will need to order these from somewhere else. Moreover I would also suggest that you take out the full damage waiver at the point of hiring the car. While I cannot fault the product under normal use, my enthusiasm has been somewhat dampened because I have had to sell my guitar to meet the costs of returning the hire car to its original condition.
Työnjälki
19
10
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
M
Handy tool but with limitations
Merlinator 23.04.2026
Delivery from Thomann was very fast, although the cardboard box was unnecessarily large for the two relatively small items ordered. I used the tool straight away to adjust the truss rod on a Gibson ES-339. It does fit, but very tightly - in my case I had to tap it gently into place using a wooden spacer to avoid any damage (I have plenty of experience working on guitars, so this was done carefully and deliberately).

If the truss rod nut is at all stiff, you’ll need more leverage than the handle comfortably provides. The handle is rather small and thin, and the cross-head screwdriver end can dig into your hand under pressure. I found it much better to slide a narrow pipe over the handle to improve grip, leverage, and control.

Once properly seated and with sufficient purchase, the tool works well. Removing it again required a few gentle taps to loosen it. One final point: the cross-head screwdriver tip is too large for the screws on the truss rod cover, so a correctly sized screwdriver is still needed—otherwise you risk damaging the screws.

Overall, a useful tool - but expect a tight fit and be prepared to improvise slightly for safe and effective use.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta