Doepfer A-110-1
4.6 tähteä viidestä yhteensä 85 asiakasarvostelusta
()
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available simultaneously: pulse, sawtooth, triangle and sine wave.
The frequency of the VCO is determined by the position of the range switch and tune controller and the control voltages at the CV inputs. Thus, the VCO provides the possibility of frequency modulation. You can set the footage (octave of the fundamental) with the selector switch. The Tune control is used to fine tune the VCO frequency.
In the pulse wave the pulse width can be adjusted manually or by voltage control or modulated (PWM).
- Width: 10 HP/ 50.5 mm
- Depth: 55 mm (measured from the rear of the front panel)
- Power requirements: +90 mA (+12V)/ -20 mA (-12V)
-
Myynnissä vuodesta Helmikuu 2003
-
Tuotenumero 154955
-
Myyntierä 1 kappaletta
-
Analogue Yes
-
Digital No
-
Width 10 TE / HP
-
variants Doepfer
-
Doepfer Oskillaattorimoduulit yhdellä silmäyksellä
-
Näytä Oskillaattorimoduulit hintaluokassa 140 € - 180 €
-
Siirry tuoteryhmään Oskillaattorimoduulit
-
Siirry tuoteryhmään Modulaariset syntetisaattorit
-
Siirry tuoteryhmään Syntetisaattorit
-
Siirry tuoteryhmään Kosketinsoittimet
-
näytä valmistajan tiedot Doepfer
-
Doepfer Kosketinsoittimet yhdellä silmäyksellä